This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. {{indexmenu_n>2.1}} ==== CanA1 adapter driver install ==== {{:soft:cana1.jpg?nolink&200 |}} <WRAP center box 100%> 1.1 Download the driver installer for your OS. {{ :soft:zadig_xp_2.2.zip | Download for WinXP, Vista}} {{ :soft:zadig-2.5.zip | Download for Win7, Win8, Win10}} </WRAP> <WRAP center box 100%> 1.2 Unzip and run. Enable the "List all devices" option. {{ :soft:driver_setup_1.jpg?nolink&600 |}} </WRAP> <WRAP center box 100%> 2. Connect the CanA1 adapter to the USB port. From the drop-down list, select the USB device - CanA1. 3. Select the driver type WinUSB (v6.1.7600.16385) (usually enabled by default). {{ :soft:driver_setup_2.jpg?nolink&600 |}} </WRAP> <WRAP center box 100%> 4. Click the "Install Driver" button. {{ :soft:driver_setup_3.jpg?nolink&600 |}} </WRAP> <WRAP center box 100%> 5. Wait for the installation to complete. {{ :soft:driver_setup_4.jpg?nolink&600 |}} </WRAP> <WRAP center box 100%> 6. Open Device Manager and make sure the driver for CanA1 is installed. 7. Restart your computer. {{ :soft:driver_setup_5.jpg?nolink&600 |}} </WRAP> Last modified: 2023/12/13 23:48by ecarlab